Bohning Seal-TiteĀ® silicone-based bowstring wax for compounds, recurves and longbows prolongs the life of bowstring and helps prevent fraying and string dry-out.
Designed and recommended for synthetic fibre bowstrings and cables, Seal-TiteĀ® resists penetration by water and keeps moisture out of the bowstring, protecting critical string fibres.
Regular use of Seal-TiteĀ® greatly reduces string friction and abrasion against cables, slides, wheels and cams. It penetrates into string fibres without damaging the string, and remains tacky enough under all weather conditions to hold strands together, yet not sticky and will not freeze or become brittle. 1 oz. tube of silicone-based wax.
To wax your string, first remove any contaminants such as dust, dirt and old wax from your bowstring.
Clean off any dirt and grime buildup on your string with a clean, soft cloth. Waxing strings without first cleaning them can drive dirt deeper into the string, causing premature wear and unwanted friction within the string.
Then apply the wax stick up and down on all areas of the bowstring and cable, including areas of the string that are served which helps to keep the bowstring from moving inside the serving and minimises wear.
With your index finger and thumb, vigorously work the wax into the string and cable, going from one end to the other. Remove any excess or residual wax with a cloth.
Synthetic bowstrings and cables eventually fray from constant contact with each other or brushing against branches, long grass or other abrasive surfaces.
To minimise fraying, it is highly recommended to regularly lubricate the string and cables with a liberal coat of string wax.
Features:
- Silicon-based wax
- Protects string & serving from the weather
- Odourless and waterproof
- Use on nock shanks for easier indexing & insertion
- Tube 28g, Box 40g
